中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
HG/T 2193-2014 洗衣机和洗碗机用橡胶和塑料进水软管和软管组合件 规范(中英文版) Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers-Specification (idt ISO 6804: 2009) |
|||
HG/T 2580-2022 橡胶或塑料涂覆织物 拉伸强度和拉断伸长率的测定(中英文版) Rubber or plastics coated fabrics - Determination of tensile strength and elongation at break |
|||
GB/T 41931-2022 塑料/橡胶 聚合物分散体和合成橡胶胶乳 冻融循环稳定性试验(中英文版) Plastics/Rubber Polymer Dispersions and Synthetic Rubber Latex Freeze-Thaw Cycle Stability Test |
|||
GB/T 5568-2022 橡胶或塑料软管及软管组合件 无曲挠液压脉冲试验(中英文版) Rubber or plastics hoses and hose assemblies - Hydraulic impulse test without deflection |
|||
GB/T 38687-2020 橡胶塑料机械 外围设备通信协议(中英文版) Rubber and plastics machinery—Communicating protocol for auxiliary equipment |
|||
GB/T 25156-2020 橡胶塑料注射成型机通用技术要求及检测方法(中英文版) General specifications and inspection methods of rubber and plastics injection moulding machines |
|||
GB/T 38533-2020 橡胶塑料注射成型机 模具固定和联接尺寸(中英文版) Injection moulding machines for rubber and plastics—Mould fixing and connection dimensions |
|||
GB/T 39483.2-2020 橡胶塑料注射成型机 接口 第2部分:数据交换接口(中英文版) Rubber and plastics injection moulding machine—Interface—Part 2:Data exchange interface |
|||
GB/T 14905-2020 橡胶和塑料软管 各层间粘合强度的测定(中英文版) Rubber and plastics hoses—Determination of adhesion between components |
|||
GB/T 39483.1-2020 橡胶塑料注射成型机 接口 第1部分:机械和电气接口(中英文版) Rubber and plastics injection moulding machine—Interface —Part 1: Mechanical and electrical interface |
|||
GB/T 39249-2020 橡胶和塑料软管及非增强软管 织物增强型 低温压扁试验(中英文版) Rubber and plastics hoses and tubing—Textile-reinforced types—Sub-ambient temperature crush test |
|||
GB/T 39327-2020 船用发动机湿式排气系统用橡胶和塑料软管 规范(中英文版) Rubber and plastics hoses for marine-engine wet-exhaust systems—Specification |
|||
GB/T 9576-2019 橡胶和塑料软管及软管组合件 选择、贮存、使用和维护指南(中英文版) Rubber and plastics hoses and hose assemblies—Guidelines for selection, storage, use and maintenance |
|||
GB/T 36587-2018 橡胶塑料机械 术语(中英文版) Rubber and plastics machinery—Terminology |
|||
GB/T 5565.1-2017 橡胶和塑料软管及非增强软管 柔性及挺性的测量 第1部分:室温弯曲试验(中英文版) Rubber and plastics hoses and tubing—Measurement of flexibility and stiffness—Part 1: Bending tests at ambient temperatures |
|||
GB/T 5565.2-2017 橡胶和塑料软管及非增强软管 柔性及挺性的测量 第2部分:低于室温弯曲试验(中英文版) Rubber and plastics hoses and tubing—Measurement of flexibility and stiffness—Part 2: Bending tests at sub-ambient temperatures |
|||
GB/T 9574-2017 橡胶和塑料软管及软管组合件 验证压力、爆破压力与最大工作压力的比率(中英文版) Rubber and plastics hoses and hose assemblies—Ratios of proof and burst pressure to maximum working pressure |
|||
GB/T 5565.3-2017 橡胶和塑料软管及非增强软管 柔性及挺性的测量 第3部分:高温和低温弯曲试验(中英文版) Rubber and plastics hoses and tubing—Measurement of flexibility and stiffness—Part 3:Bending tests at high and low temperatures |
|||
GB/T 12784-2017 橡胶塑料加压式捏炼机(中英文版) Pressurized kneader for rubber and plastics |
|||
GB/T 33580-2017 橡胶塑料挤出机能耗检测方法(中英文版) Testing and measuring methods of energy consumption for rubber and plastics extruder |
找到:92條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 4 5 |